- Home
- All Products
- Model L-706 Patient Penetrometer Kit
Model L-706 Patient Penetrometer Kit
Features
- Three High-Purity Aluminum Plates
- One Laminated Lead Stop Plate
- Four Copper Plates
- One Resolution Plate
- Two Sets of Spacing Rods
The Ludlum Model L-706 Patient Penetrometer Kit provides the necessary patient phantom attenuation material to test the exposure rate output of any standard or digital fluoroscopic system. This kit is designed to work with almost all X-ray exposure or multimeter measurement devices.
The three high-purity (1100) aluminum plates are used in combinations to simulate the different masses of an adult abdomen, a child abdomen, or an adult chest. Using all three plates represents 26 cm (10.2 in.) of water for a large adult abdomen at 90 kVp. A child abdomen or adult chest is simulated by using one or two of the plates depending on the age of the child and one for the small adult chest. Automatic brightness control at maximum output is evaluated using the lead “stop” plate, which is laminated to ensure the safety of the user.
The resolution plate has four columns of five holes each with hole diameters of the following sizes:
- Two columns with 6.4 mm, 4.5 mm, 3.2 mm, 2.2 mm, 1.6 mm (0.25 in., 0.176 in., 0.125 in., 0.088 in., 0.0625 in.) holes
- Two columns with 4.7 mm, 3.2 mm, 1.6 mm, 0.8 mm, 0.4 mm (0.187 in., 0.125 in., 0.0625 in., 0.032 in., 0.016 in.) holes
Typically two of the aluminum plates (one above and one below) are used to measure the contrast gradient of the image systems. Two sets of spacing rods in two different lengths are provided to act as spacers from the X-ray source.
IMPORTANT NOTICE
Recommendations from a revision of FDA-CFR-21 [CITE: 21CFR1020.30] indicate that the long-used Patient Penetrometer Plates should be larger by about 3.8 cm (1.5 in.) than the current 17.8 x 17.8 cm (7 x 7 in.) plates, in order to cover the entire X-ray beam during the testing of the X-ray and fluoroscopic systems. Ludlum also offers the Model L-706-21 with a plate size of 21 x 21 cm (8.3 x 8.3 in.).
Request a quote Download Spec Sheet
Related Products
Headphone Jack
This modification for survey meters adds a headphone jack to the instrument body so headphones can be used to monitor click-per-event audio and audio alarms. Headphones are helpful when the instrument is being used in areas with high ambient noise levels or in areas where the audio would be distracting to others, such as in a medical or office environment.
Shoulder Strap
This 1.8 m (6 ft) adjustable shoulder strap is a great way to keep your hands free while operating survey meters. The nylon strap with a wide rubber comfort pad can also be helpful for conveying some of the heavier instrument/detector combinations in the field.
Model 3-IS NORM Kit
- Ready-to-Go Kit in Rugged Case
- Intrinsically Safe Analog Survey Meter
- Measures Alpha, Beta, and Gamma Contamination
- Includes:
- Model 3-IS Intrinsically Safe Survey Meter
- Model 44-9 Alpha-Beta-Gamma Detector
- Model 44-2 High Energy Gamma Detector
- Check Source, Cable, Batteries, Transport & Storage Case
Model 14C-MERK
Medical Environment Response Kit
- Model 14C Survey Meter
- Model 44-2 Gamma Scintillator Detector
- Model 44-9 Alpha-Beta-Gamma GM Detector
- Model 25 Series Personal Radiation Monitor
- Check Source and Holder
- Rugged Case
Model 2241-3MERK
Medical Environment Response Kit
- Model 2241-3 Scaler-Ratemeter
- Model 44-2 Gamma Scintillator Detector
- Model 44-9 Alpha-Beta-Gamma GM Detector
- Model 44-142 Beta Scintillator Detector
- Model 25 Series Personal Radiation Monitor
- Check Source and Holder
- Rugged Case
Model 3001-MERK
Medical Environment Response Kit
- Model 3001 Survey Meter
- Model 44-2 Gamma Scintillator Detector
- Model 44-9 Alpha-Beta-Gamma GM Detector
- Model 44-142 Beta Scintillator Detector
- Model 25 Series Personal Radiation Monitor
- Check Source
- Rugged Case
Model 14C-RK
Emergency Response Kit
- Model 14C Survey Meter
- Model 44-2 Gamma Scintillator Detector
- Model 44-9 Alpha-Beta-Gamma GM Detector
- Check Source and Holder
- Rugged Case
Cables
Ludlum offers straight cables with either type C, BNC, SHV, MHV, or UHF connectors. Unless specified otherwise, Ludlum survey meters and detectors are shipped with “C” type connectors. When a meter and accompanying probe are ordered as a matched set, Ludlum automatically includes a 99 cm (39 in.) straight-type cable with “C” connectors at no additional charge. (Note: We no longer offer coiled cables.)
Model 3002/FM Series
Alpha-Beta Floor Monitor
- Alpha-Beta Scintillation Detectors
- Active Window Area: 400 or 1080 cm2 (62 or 167.4 in2)
- 22.4, 40.9, or 65.7 cm (8.8, 16.1, or 25.9 in.) Wide Detection Path
- Adjustable Detector Height
Model 42-38
WENDI-2 Wide Energy Neutron Detector
- Detector Type:
- 3He Tube
- Moderator: 22.9 cm (9 in.) dia.
- Sensitivity (241Am/Be): 450 cpm per mrem/hr
- Detection Range: Thermal to 5 GeV
Model 78-6
Stretch Scope Survey Meter
- Analog + Digital Meter
- Extends to 3.6 m (12 ft.)
- NaI(Tl) Scintillator Detector
- Range: 0.01 to 50 µSv/h (1 to 5000 µR/hr)
Model 79/2
Stretch Scope Survey Meter
- Digital Meter
- Extends to 4.5 m (14.75 ft.)
- Internal Energy-Compensated GM
- Range: 0.001 mSv/h to 0.04 Sv/h (0.1 mR/hr to 4 R/hr)
Model 79/1
Stretch Scope Survey Meter
- Digital Meter
- Extends to 4.5 m (14.75 ft.)
- CsI(Tl) Scintillator Detector
- Range: 0.01 µSv/h to 500 µSv/h (1 µR/hr to 50 mR/hr)
Model 79
Stretch Scope Survey Meter
- Digital Meter
- Extends to 4.5 m (14.75 ft.)
- Energy-Compensated GM Detector
- Range: 10 µSv/h to 10 Sv/h (1 mR/hr to 1000 R/hr)
