Transport & Storage Case for Model 78-Series
- Watertight, Crushproof, Dust Proof Case
- Secure Transport and Storage
- Wheels with Stainless Steel Bearings
- 3-Piece Custom-Cut Foam Protects Sensitive Instruments
- Home
- All Products
All Products
Stuart Hunt & Associates provides a full range of radiation safety products for regulatory compliance and custom solutions for business.
Rolling Case for REM Ball Neutron Meters
- Four Press & Pull Latches
- Two Double-Layered, Soft-Grip Handles
- Two Padlockable Hasps
- Stainless Steel Pin Hinges
- Dense Protective Foam Padding Included
- Waterproof (Up to 3 Feet) and Dustproof
- Purge Valve
- Includes Wheels and Extendable Handle for Ease of Transportation
Carrying Case for REM Ball Neutron Meters
- Recessed Twist Latch
- Padlockable (up to a 1/4 in. shank)
- Recessed Handle with Rubber Grip
- Hinged Lid with Trunk Stay
- Foam Padding on All Sides
Transport & Storage Case - Large
These transport and storage “satchel-type” cases are lightweight, but ruggedly built with steel pins in the hinges, heavy duty latches, and comfortable, fold-down handles. The cases are resistant to impact and/or chemical damage. The cases may be padlocked through the provided hasps for additional security for the instruments.
Case Model for 3000-Series
This case has the additional depth to accommodate the proportions of the Model 3000-Series of instruments. It is included with the Model 3000-based response kits to provide the necessary allowance for the included foam padding.
Transport & Storage Case - Medium
These transport and storage “satchel-type” cases are lightweight, but ruggedly built with steel pins in the hinges, heavy duty latches, and comfortable, fold-down handles. The cases are resistant to impact and chemical damage. The cases may be padlocked through the provided hasps for additional security for the instruments.
Simulated 60Co Source
Calibrated 0.1 Bq/g (10 Bq) simulated 60Co radiation source for use with Model 2100 Sample Counter.
Stick-On Check Source Holder
This unique product fastens Ludlum's very thin (0.010 inches thick) plastic laminate type check source in sizes up to 1.0 inch in diameter to instruments using an industrial strength adhesive. This design offers a lower cost alternative to Ludlum's standard plastic disk type sources and Mechanical Holder.
Mechanical Check Source Holder
Ludlum's traditional mechanical type check source holder is attached to the instrument housing with four screws. A nice swing-away door exposes the source whenever it is needed to verify detector accuracy and clicks closed to keep the source protected and secure. This type holder is typically used with the plastic disk type check sources measuring 2.5 cm diameter (1 inch).
Transport & Storage Case - Small
These transport and storage “satchel-type” cases are lightweight, but ruggedly built with steel pins in the hinges, heavy duty latches, and comfortable, fold-down handles. The cases are resistant to impact and chemical damage. The cases may be padlocked through the provided hasps for additional security for the instruments. Tongue and groove construction and an O-ring provide a dust and waterproof (up to 0.9 m [3 ft.]) design.
Connectors & Adapters
Ludlum offers tee-type connectors that split a single signal into two signals and adapters that convert from one connector type to another.
Check Sources with Stick-On Holder
These sources are designed to be attached to instruments. They include a very thin plastic laminate source and an industrial strength adhesive holder for attaching directly to the instrument of choice. The table below presents two of the more common sources. Other source activities and isotopes are available upon request.
Plastic Disk Check Sources
These are general purpose check sources used freely to check responses from multiple instruments, or may be contained inside Ludlum's mechanical check source holder that is attached directly to an instrument for convenience. The sources are sealed within a plastic disk.
